HME030065N 3.2 CF BEVERAGE COOLER MANUAL 20180822

4m ago
15 Views
2 Downloads
504.71 KB
12 Pages
Last View : 29d ago
Last Download : 1m ago
Upload by : Rosa Marty
Transcription

Before using your Beverage Cooler, please read this manual.BEVERAGECOOLER3.2 Cubic Feet

BEFORE FIRST USE:To prevent any internal damage, it is very important tokeep refrigeration units (like this one) upright throughouttheir journey. Please leave it standing upright and outsidethe box for 24 HOURS before plugging it in.

TABLE OF CONTENTSImportant Safety InstructionsParts antyManufacturing InfoWarningContact Us6789910111111

Congratulationson bringing home your new appliance!Don’t forget to register your product at homelabs.com/regfor updates, coupons, and other relevant information.Although greatly appreciated, product registration is notrequired to activate any warranty.

IMPORTANT SAFETY INSTRUCTIONS Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than thoserecommended by the manufacturer. Do not store explosive substances, such as aerosol cans with flammable propellant, in this appliance. Do not use extension cords or ungrounded (two-prong) adapters. This appliance is intended to be used in households and similar applications, such as staff kitchen areas inshops, offices and other working environments; hotels, motels and other residential type environments; bed andbreakfast type environments; catering and similar non-retail applications. Do not pull the power cord when pulling the power plug of the beverage cooler. Please firmly grasp the plug andpull it out from the socket directly.WARNINGS RELATED TO ELECTRICITY Do not damage the power cord under any condition. Please use a dedicated three-hole power socket, which is 15A or more and not shared with other electricalappliances. Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line. The beverage cooler uses an AC power supply of 115V/60 Hz. In case of leaking gas, turn off the leaking valve and open your doors and windows. Do not unplug the cooleryourself, as it may cause a fire. Contact customer support. For your safety, don’t place electric devices on top of the cooler, like microwaves or electric kettles, and don’tstore your beverage cooler inside pantries.WARNINGS RELATED TO USE Make sure the cooler is placed in a well-ventilated, indoor environment on flat, sturdy ground (rotate left orright to adjust the wheel to level if unstable). Be careful not to get fingers or dangling accessories caught in the cooler door. This cooler and its packaging are not intended to be played with or used by children. If a child is using thecooler, it must be with adult supervision to avoid injury. Keep the cooler out of moist, damp, or humid environments and situations, so as not to damage the electricalinsulation. Do not use a base, cooler door, etc. as pedal or support. Do not place heavy objects on top of the cooler to prevent accidental damage or injury.WARNINGS RELATED TO PLACING ITEMS Do not put flammable, explosive, volatile, or highly corrosive items in the cooler to prevent damages to theproduct or re accidents. Do not place flammable items near the cooler to avoid a fire hazard. This product is for household refrigeration appliances, mainly used for the storage of beverages. It’s not used forother purposes, such as storage of blood, drugs, and biological products. Do not cover or close ventilation and exhaust holes.SAVE THESE INSTRUCTIONSFor Household Use Only6

PARTS DESCRIPTIONTemperature ControlFanShelfShelfGlass DoorAdjustable FootPLACEMENT Before using the cooler, remove all packaging materials, including bottom cushions, foam pads, and tape insidethe cooler. Tear off the protective film on the door and the cooler body. Make sure the cooler is placed in a well-ventilated, indoor environment on flat, sturdy ground (rotate left orright to adjust the wheel to level if unstable). Please operate this beverage cooler in a room of 133 cubit feet (or larger) for safety concern. Avoid putting the cooler in direct sunlight or too close to a heat source. Keep a safe distance of at least 30 cmbetween the cooler and a stove or furnace if it can’t be avoided. We also advise applying an insulation board inthat case. Keep a circulation space of at least 4 cm on both sides of the cooler to preserve power.7

OPERATIONPROPER USE OF BEVERAGE COOLEREnergy Conservation The cooler should be placed in a room that is dry and ventilated. The cooler cannot be placed under directsunlight or next to a heat source (such as a radiator, stove, etc.), and a suitable insulation board must beapplied if necessary. Try to shorten the opening time of cooler’s door. Avoid putting warm beverages in the cooler.Installation Keep in upright position for 24 hours before initial power up. While the cooler is empty, set the Temperature Control to maximum and leave for 1 hour. When you start putting beverages inside the cooler, maintain a 4 cm gap between the interior wall of thecooler and the beverages to keep the proper airflow. Follow steps below if you want to change the door orientation from left-hinge to right-hinge:1. Use a screwdriver to remove upper and lower left hinge (triangle with 3 screws).2. Transfer the hinge to the right of the cooler and attach to the right side of the door.INTRODUCTION TO THE BEVERAGE COOLER’S FUNCTIONS-Display Controls When turning on for the first time, the display screen will be a full display for 3 seconds and the startuptone will ring.-Standby Mode To activate standby mode, hold the standby button for 3 seconds. You will hear a beep and the display area will becut off. To deactivate standby mode, press the button again. You will hear a beep and the standard display will show.-Lighting Press the lighting button to turn the light on or off.-Temperature Setting Press the increase temperature button to increase the temperature one degree at a time. Press the decreasetemperature button to decrease the temperature one degree at a time. To change display from OF to OC, press andhold the increase and decrease button simultaneously for 5 seconds.-Memory Function If turned off, this cooler will remember any settings in place and will work according to those settings once it’sturned on again.-Fault IndicatorsIf any of these indicators are displayed, it means the cooler has the following issues.FAULT CODEDESCRIPTIONE1R room sensor failureE4R room defrost sensor failure8

MAINTENANCEDISCONNECTING THE BEVERAGE COOLERUnplug the power plug from the socket to disconnect the cooler.CLEANING YOUR BEVERAGE COOLERDusting behind the cooler and on the ground will improve the cooling effect and save energy. The interior of the coolershould be cleaned to avoid any odor. Follow the cleaning procedure below:1. Unplug the cooler.2. Wipe the door seal with warm water.3. Use soap and warm water to clean the cooler.4. Reconnect the cooler when the cooler is clean and dry.Note: Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid, or alkaline itemsas this may damage the cooler surface and interior.FREQUENTLY ASKED QUESTIONSI’m hearing some sounds, what’s up with that? Buzzing or any gurgling sound is normal, as that can be a result of the unitworking properly or refrigerating fluid flowing through the pipeline.TROUBLESHOOTINGPROBLEMPOSSIBLE CAUSESPOSSIBLE CAUSESCooler isn’t coolThe door is being opened too often.The cooler is too full of bottles or cans.Reduce the frequency of opening the doorand give it 4-5 hours.Cooler is not refrigeratingThe power is out or the cooler isn’tplugged in.Check the power. Make sure that the cooleris plugged in.LED light is offThe LED light is broken.Contact customer support.Condensation on theglass doorThe temperature is set too low or too high.Increase the temperature and use a rag towipe away any drops of water.9

WARRANTYhOme offers a limited two-year warranty (“warranty period”) on all of our products purchased new and unused fromhOme Technologies, LLC or an authorized reseller, with an original proof of purchase and where a defect has arisen,wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period. The warrantydoes not apply where damage is caused by other factors, including but without limitation: (a) normal wear and tear; (b)abuse, mishandling, accident, or failure to follow operating instructions; (c) exposure to liquid or infiltration of foreignparticles; (d) servicing or modifications of the product other than by hOme ; (e) commercial or non-household use.The hOme warranty covers all costs related to restoring the proven defective product through repair or replacement ofany defective part and necessary labor so that it conforms to its original specifications.A receipt indicating the purchase date is required for any claim, so please keep all receipts in a safe place. We recommendthat you register your product on our website, homelabs.com/reg. Although greatly appreciated, the product registration isnot required to activate any warranty and product registration does not eliminate the need for the original proof of purchase.The warranty becomes void if attempts at repair are made by non-authorized third parties and/or if spare parts, otherthan those provided by hOme , are used.You may also arrange for service after the warranty expires at an additional cost.These are our general terms for warranty service, but we always urge our customers to reach out to us with any issue,regardless of warranty terms. If you have an issue with a hOme product, please contact us at 1-800-898-3002, and wewill do our best to resolve it for you.This warranty gives you specific legal rights, and you may have other legal rights which vary from state to state, countryto country or province to province. The customer may assert any such rights at their sole discretion.10

MANUFACTURING INFOThis manual is to be used with all items with the model numberHME030065NSKU# : HME030065NPART#: HME030065MNLRATING: 115 V, 60 Hz, 75 WATTS, AC ONLYWARNINGKeep all plastic bags away from children.State of California Proposition 65 Warnings:THIS PRODUCT COULD CONTAIN ONE OR MORE CHEMICALS, WHICH ARE KNOWN TO THE STATE OF CALIFORNIA TOCAUSE CANCER, BIRTH DEFECTS, OR OTHER REPRODUCTIVE HARM.Manufacturer, distributor, importer, and seller are not liable for ANY damage caused by improper use, storage, care orfailure to follow warnings associated with this product.CONTACT USCHAT W ITH U Shomelabs.com/chatCALL U S1-(800)-898-300211EMAIL [email protected]

[email protected]/help 2016 hOme Technologies, LLC37 East 18 Street, 7th FloorNew York, NY 10003All rights reserved, hOme . Printed in China.For HouseholdUse Only

FAULT CODE DESCRIPTION E4 Installation Keep in upright position for 24 hours before initial power up. While the cooler is empty, set the Temperature Control to maximum and leave for 1 hour. When you start putting beverages inside the coo